Decorate the wall with a cork without using glue — a self-adhesive cork


Decorate the wall with a cork without using glue — a self-adhesive cork

Decorate the wall with a cork without using glue — a self-adhesive cork. Self-adhesive cork will win your heart if you value simple, quick and hassle-free solutions. The need for easy and instant installation of a convenient technical connector in any location resulted in a cork with a layer of strong and durable adhesive.

Self-adhesive cork sheets are standard cork sheets that are covered with a self-adhesive layer. The adhesive used is very strong, which makes the panels suitable for both smooth and slightly rough surfaces. If you are not a fan of traditional glue or screws, you will surely be interested in our medium grain self-adhesive cork.


Cork boards on the wall


Decorate the wall with a cork without using glue — a self-adhesive cork

Ideal for all types of surfaces for pinning information, announcements, newsletters, etc. Due to the high flexibility, the excellent aesthetics and the high resistance to flaking, medium-grain cork panels are used as blackboards, display cases and advertising screens.

Installing cork mats with our self-adhesive layer is quick, clean and easy. All you have to do is break open the protective film and glue the cork sheet to the previously prepared substrate. If you plan to cover a larger area with a cork, remember to line up the edges before installing – with a sharp wallpaper knife, for example. Simple and smooth cork edges reduce the joints between the panels and significantly improve the end effect.


Problem with a noisy neighbor?


cork diamonds adhesive

Decorate the wall with a cork without using glue — a self-adhesive cork. The coarse-grained self-adhesive stopper is excellent sound and heat insulation. Coarse-grain cork panels have a higher density compared to fine and medium-grain cork panels. As a sound-absorbing layer, quickly and conveniently attached directly to the wall, air noises that come to us behind the wall are avoided.

If the wall is relatively thin and the noise is very annoying, then the use of a light structure consisting of 15-20 mm cork board, an air gap or mineral wool and a closing cardboard-plaster board or OSB should be considered. In the vast majority of cases, the satisfactory effects of sound absorption lead to direct adhesion to the wall of 10 mm thick coarse cork.


Leave a Reply

X
Buy Cork Samples
Copy link
Powered by Social Snap