Cork Panels

Cork panel are extremely durable and proven in thousands of rooms in the last 20-30 years. Due to the fact that the cork is water resistant, there are no problems with drying out, as is the case with wooden parquet. The atypical paneled cellular patterns give the interior an elegant look combined with a modern, ecological design. It is used both at home and in the office. The panels are impregnated and can be walked on immediately.

Showing all 4 results

How do cork panels contribute to soundproofing and insulating the floor in an apartment?

Cork panels are an excellent material for soundproofing and insulating floors in the apartment. Here are some benefits of using cork boards for this purpose:

Sound insulation: The bark of the cork oak tree is naturally flexible, which gives cork panels excellent sound insulation properties. They absorb noise, preventing noise from spreading between rooms and muffling the noise of running or falling objects. This allows you to significantly reduce the noise level in the room.

Floor insulation: Cork bark has a gas-filled cellular structure, making cork boards an excellent heat insulator. As a result, they retain heat, which helps warm the room. In colder climates, floor insulation can be particularly important and contribute to increased thermal comfort in the home.

Flexibility and walking comfort: Cork sheets are flexible and soft, making walking comfortable. This significantly increases the comfort of using the space, especially in rooms where you walk a lot, such as the kitchen or living room.

Easy Installation: Cork boards are available in ready-to-use sheets and are therefore easy to install. They can be installed on different surfaces, including existing floors, making them an attractive modernization solution.

Hygienic: Cork oak bark has natural antibacterial and antifungal properties, making cork panels allergy-friendly and easy to keep clean.

In summary, cork panels are an excellent solution for soundproofing and insulating floors in an apartment, offering both practical acoustic and thermal benefits.

Cork floor tiles – tips for laying them on the floor at home.
Installing cork floor tiles can be an excellent choice if you want a comfortable and environmentally friendly floor. Here are some tips for laying cork floor tiles:

1. Acclimatize the cork:

Allow the cork floor tiles to acclimate to the room for at least 48 hours before installation. This allows the cork to adapt to the temperature and humidity of the room.

2. Prepare the surface:

Make sure the surface is clean, dry and level. Remove any residue and repair any irregularities or cracks.
If installing on a concrete subfloor, ensure it is properly cured and dried.

3. Moisture Barrier:

Consider installing a moisture barrier, such as a vapor barrier, especially if you are installing the cap on a concrete subfloor or in a basement.

4. Layout and planning:

Before you begin, you need to plan the placement of your cork floor tiles. Consider the placement of doors and transitions to other flooring materials. Measure and mark the starting point to ensure a symmetrical and balanced installation.

5. Primer:

Some cork flooring may require a primer. Follow the manufacturer’s recommendations and, if necessary, lay a special base, preferably cork.

6. Adhesive or click system:

Cork floors can be installed using adhesive or a click system. Follow the manufacturer’s instructions for your specific product.

7. Installation:

Start laying the cork floor in the center of the room and work your way outwards. This helps maintain symmetry.
Make sure the panels fit together snugly and leave no gaps. To ensure a tight fit, use a tapping block and rubber mallet to install the click system.

8. Cut and Fit:

Use a sharp knife or fine-tooth saw to cut the cork panels to fit obstacles or the perimeter of the room.
Maintain expansion gaps around the edges of the room, usually about 1/4 inch (0.6 cm) to allow for natural expansion and contraction.

9. Seal joints:

Consider using a cork floor sealer at the joints between boards for a seamless look and increased durability.

10. Conclusion:

Install transition strips where cork floors meet other flooring or in doorways. Trim excess cork from the edges using moldings or baseboards for a clean and finished look.

11. Maintenance:

Follow the manufacturer’s care instructions to ensure your cork floor stays beautiful for a long time.