Polymer water cork adhesive 5 KG

Additional information

Weight 5.200000 kg
Package

5KG

35,99 £ per pcs

Polymer water cork adhesive 5 KG

SKU: KLWP5KG Category: Tags: ,

Description

Water cork adhesive is a high-quality dispersion adhesive in the form of a dense paste, used for immediate installation of all kinds of cork linings.

It contains no solvents, practically odorless, non-flammable.

It is intended for indoor applications. This product is characterized by adhesion far exceeding the requirements of the standard, unusual flexibility characteristic for polymeric adhesives and white color.

Use on all stable, dry and clean building substrates, as well as on wood-based and deformable substrates, e.g. G-K or OSB boards. The ground must be level.
Apply glue straight from the bucket. We apply it using a velor roller lubricating one surface. The glued surface must be well cleaned.

Apply the cladding directly to the surface covered with glue, and then press with a roller so that its layer is reduced to half the thickness. The adhesive binds
as a result of evaporation of water. This binding is irreversible.

Works should be carried out at ambient and substrate temperature from 8 ° C to 30 ° C.

Drying time: 24h (20st.C) – depends on the absorbency of the substrate

Open working time: approx. 10 min. (20 degrees C)

Close the bucket tightly for reuse. To make the consistency plastic, it is recommended to mix the product before use. Shelf life 12 months. Cleaning of tools – with water immediately after use.

TECHNICAL PARAMETERS

Capacity: 5kg

Adhesive consumption:

using a roller:

ok.2m2 / kg

White color

Consistency: Thixotropic paste

 

 

Additional information

Weight 5.200000 kg
Package

5KG