Polymer water cork adhesive

39,99 £

Polymer water cork adhesive

SKU: KLW1605L-1 Category: Tags: ,

Description

GENERAL CHARACTERISTICS

Water cork adhesive is a high-quality dispersion adhesive in the form of a dense paste, used for immediate installation of all kinds of cork linings.

RECOMMENDED USE

It is intended for indoor applications. This product is characterized by adhesion far exceeding the requirements of the standard, unusual flexibility characteristic for polymeric adhesives and white color. Use on all stable, dry and clean building substrates, as well as on wood-based and deformable substrates, e.g. G-K or OSB boards. The ground must be level. Apply glue straight from the bucket. Spread with a notched trowel between 2-4 mm.

The adhesive layer should be deeply grooved and not thicker than the width of the teeth. Apply the cladding directly to the surface covered with glue, and then press with a roller so that its layer is reduced to half the thickness. The adhesive binds as a result of evaporation of water. This binding is irreversible. Works should be carried out at ambient and substrate temperature from 8 ° C to 30 ° C.

Coverage using a 2mm -0.9 / m2 trowel; 4mm-1.8kg / m2. Close the bucket tightly for reuse. To make the consistency plastic, it is recommended to mix the product before use. Shelf life 12 months. Cleaning of tools – with water immediately after use.

 

Additional information

Weight5.200000 kg